Gun cleaning kit - Flunatec Gun Care Set 5

FLUNATEC Gun Coating is a modern lubricant with a wide range of applications developed especially for guns. The base of the lubricant is a highly resistant layer of ceramic and Teflon, thanks to which it acquires its unique properties. Above all, the lubricant guarantees high lubricity and slip resistance of the treated materials. In addition, Fluna Gun Coating does not leave a residue like some other lubricants and forms an invisible and dry protective film after evaporation of the carrier, the treated surface is thus protected in the long term, especially against corrosion. The ceramic coating guarantees a long-lasting shine and above all protection against the penetration of air moisture or even sweat when holding the gun by the metal parts, which is a very important feature. Thanks to the dry surface after treatment, soiling and the formation of grease stains on clothing, holsters and hands are minimized. The lubricant is odorless and colorless, so it can also be used for quick "renovation" of old and dingy surfaces, which will get a younger and more beautiful appearance just a moment after application. Although this lubricant is formulated directly for metal gun parts, it can also be used on other metals such as gold, silver or where there is a requirement for good slip resistance, minimised abrasion and long term protection. It can also be used seamlessly on painted wood, rubber, cast iron and plastics, but the best results are achieved primarily on metal

The main advantages of FLUNATEC GUN COATING

Use of the preparation

Flunatec Gun Coating to remove coarse dirt or heavily fouled barrels use Fluna Gun Cleaner first. For the rest of the gun, the usual procedure can be followed where you first apply or spray the required amount of Fluna Gun Coating to the specific area and spread with a soft cloth. Use a regular rod and conventional brushes (1. bristle, 2. brass or bronze and 3. cotton). To obtain a glossy finish, polish afterwards with a dry and clean cloth. Shake the container with the product before use

GunDegreaser 100 ml

cleans and degreases deposits and streak-free in one step easy to use, does not damage rubber and plastics

Application

Degreasing

Apply Fluna Gun Degreaser II to the appropriate area, spread with a dry cloth and wipe. Removes existing oils and grease instantly and without residue. Repeat the process several times until the surface is completely degreased.

Cleaning of rifle and pistol parts

Spray Fluna Gun Degreaser II onto the soiled surface and allow it to work briefly. If necessary, remove dirt with a brush or brush and wipe with a rag. Once cleaned, the surface is simultaneously degreased and ready for Fluna Gun Coating. Fluna Gun Degreaser II will not damage paint, rubber or castings. Do not use on aluminum and oiled grips, stocks,... Plastic drip bottle with cover

Bore Pro 100 ml

If you are looking for a cleaning product that will clean the bore of your barrel very effectively, this is what you need. BORE PRO from the Austrian manufacturer FLUNA TEC can clean any residue left by gunpowder, but above all it can remove copper and tombak deposits. It can be used in all types of barrels. At the same time, it converts the barrel and effectively protects it against corrosion

Application

For a very thorough cleaning, we recommend you to use other gun cleaning products from Fluna Tec. First, the gun should be thoroughly degreased and free of coarse dirt with Fluna Tec Gun Degreaser. Then put the product on the felt or metal brush of the cleaning rod. Then insert the rod into the barrel and pull the rod from the breech to the muzzle. Leave the preparation for 15 minutes. Afterwards, drag the barrel with a clean felt to dry, or repeat the cleaning with the product if the barrel is heavily soiled.