Glue GA AQUASURE + SR 28g

AQUASURE+SR is a polyurethane based adhesive/sealant for the repair of footwear and heavy soiled canvas. It has the highest viscosity of the SEAM GRIP/AQUASURE group, forming a thicker layer of PU rubber that is self-supporting, flexible and pliable. The adhesive is perfectly waterproof. It enables patchless bonding, butt bonding and also reconstruction of missing material. It allows the reconstruction of a trampled rubber shoe tread and by saturating the surface of the uncured adhesive with a water-soluble crystalline material (e.g. salt, sugar, etc.) it is possible to create a slip-resistant relief

Instructions for use: Apply directly from tube, cure in 4 hours, polymerize to full structural strength in 24-36 hours. COTOL 240 or COTOL 240 HV can be used as accelerator

Safety information:

HAZARD

Contains 4,4-methylenediphenyl diisocyanate Flammable liquid and vapor. Irritating to skin. Causes serious eye irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. Keep out of reach of children. Protect from heat, hot surfaces, sparks, open flames and other sources of ignition, no smoking. . Avoid inhalation of vapours. In case of inadequate ventilation, use respiratory protective equipment. IN CONTACT WITH SKIN (or hair): Remove all contaminated articles of clothing immediately. Rinse skin with water. For respiratory problems: call a doctor. In case of fire: Use powder extinguisher, belt, foam to extinguish. Dispose of contents/packaging according to hazardous waste regulations

Packaging: 28 g tube