☎️ Šaľa Headquarters + ESHOP: +421 917 955 557 (Mon-Fri: 8:30-17:00) ✉️ E-mail: info@betalov.sk
To view weapons and ammunition, please
login.

Discounted set of Fenix HT18Rhunting flashlight , Fenix AER-05 cable switch and Fenix ALG-18 gun mount .

The Fenix HT18R rechargeable hunting flashlight is one of the tactical flashlights with the greatest range on offer. Its powerful reflector offers a range of up to 1,100 meters and a luminous flux of up to 2,800 lumens (ANSI). The light source is the high-performance LED SFT-70 from the Americ

...

Show more
174,14 € inc. VAT
Out of stock
141,58 € (exc. VAT)
Remove the watchdog

Do you want to be informed about product availability?
Try our watch dog

Catalog number: HT18RHUNTKIT

Discounted set of Fenix HT18Rhunting flashlight , Fenix AER-05 cable switch and Fenix ALG-18 gun mount .

The Fenix HT18R rechargeable hunting flashlight is one of the tactical flashlights with the greatest range on offer. Its powerful reflector offers a range of up to 1,100 meters and a luminous flux of up to 2,800 lumens (ANSI). The light source is the high-performance LED SFT-70 from the American manufacturer Luminus. A single Li-ion battery type 21700 with a capacity of 5000 mAh is used for power supply (battery included). The Fenix HT18R LED flashlight has a total of six white light functions with up to 42 hours of illumination, including strobe and SOS flashing. There is a tactical dual switch on the rear of the flashlight allowing for both instant push activation and instant strobe activation. Additionally, a red and green filter is included. Long gun mounts and the Fenix AER-05 cable switch are compatible with the flashlight. The Fenix HT18R is the ultimate light tool for professionals, hunters and all users requiring the longest range possible.

All flashlight parameters (lumen output, battery life, waterproof, range and shockproof) are measured in accordance with ANSI/NEMA FL 1-2009.

Fenix HT18R Hunting Flashlight Parameters

  • A premium Luminus SFT-70 LED with a lifetime of 50,000 hours is used.
  • Five light modes: 2800 lumens (1.6 hours) -> 1000 lumens (2.25 hours) -> 350 lumens (6.5 hours) -> 30 lumens(42 hours) -> strobe (2600 lumens) -> SOS 150 lumens (40 hours)
  • Large smooth reflector for a light cone with a range of 1100 meters (300,000 cd).
  • Electronics with digital constant power control, reverse battery insertion protection and protection against too deep battery discharge.
  • A single 21700 5000 mAh Li-ion battery is used for power.
  • Charging via the built-in waterproof USB-C connector on the lamp body.
  • Dimensions 18.9 cm (length) x 6.8 cm (head diameter) x 2.54 cm (body diameter).
  • Intelligent overheating protection.
  • Flashlight has memory and always turns on in the last set mode, except strobe and SOS.
  • Flashlight body made of aerospace hardened aluminium, flashlight head complete with striking rim.
  • Durable hard scratch resistant surface - Type III hard anodized.
  • Shockproof against falls from a height of 1 meter.
  • Highly wear-resistant, flat tapped threads.
  • Weight 253 grams (without battery) or 326 grams (including battery).
  • Waterproof and dustproof to IP68 standard (tested underwater at a depth of 2 metres).
  • Tempered ultra clear glass lens with anti-reflective coating.
  • Batteries housed between two springs - the flashlight easily tolerates recoil when used on a gun.
  • Tactical switch at the end of the flashlight (momentary on/off function) and direct access to strobe mode (instant strobe).
  • The flashlight comes with an ARB-L21-5000 V2.0 battery pack, USB-C charging cable, green filter, red filter, wrist lanyard, belt holster and spare o-ring.
  • The following accessories are also compatible with the flashlight: cable switch Fenix AER-05, quick release bar mount ALG-00, quick release bar mount ALG-15, M-LOK mount Fenix ALG-16, barrel mount Fenix ALG-18, barrel mount, metal magnetic barrel mount, plastic magnetic barrel mount, flashlight to optic mount, metal to optic mount.
  • USB mains adapter and USB car adapter can also be supplied with the flashlight.

Fenix HT18R hunting light control

Press the main tactical button on the end of the flashlight to turn on/off, hold the button for instant activation. Press the secondary toggle button to switch between power modes at any time during operation. To switch to flash mode with the flashlight on, hold the toggle button, press the button again to switch to SOS. To switch the luminaire directly into strobe mode, press and hold the toggle button.

Memory for last set mode - the luminaire has a memory and will always switch on in the last set mode, except strobe and SOS.

Battery Replacement - unscrew the end cap of the flashlight and insert the battery with the plus terminal facing in. Then tighten the end cap fully again.

Charging - remove the dust cap and plug the USB-C charging cable into the charging port of the flashlight. During charging, the indicator opposite the charging connector glows red. When fully charged, it will turn green. When charging is complete, reseal the dust cap. Normal charging time is approximately 3.5 hours for a fully discharged flashlight. The flashlight cannot be used while charging.

Indication of battery charge status - each time the lamp is switched on, the indication LED opposite the charging connector is activated for three seconds. If the indicator LED is green, the battery is more than 85% charged. Green flashing indicates 50-85% capacity. If it glows red, it is 25-50% charged. Red flashing indicates less than 25% battery capacity remaining.

Intelligent overheat protection - if the temperature of the lamp exceeds 65°C (65°F), the power is automatically reduced. As soon as the temperature drops below 65°C, the highest power can be used again.

Low battery warning - if the voltage drops below the set level the luminaire will reduce the brightness to a lower level until it reaches an output of 30 lumens. When the lowest output is reached, the battery charge indicator will flash red to remind you to recharge or replace the battery.

Warning

  • Use only high quality 21700 rechargeable Li-ion batteries with protective electronics.
  • Insert batteries with the positive terminal facing the head of the flashlight.
  • If the protective rubber rings appear damaged after prolonged use, replace them. The rings should also be lubricated to prevent erosion of the rubber. By following these rules, the luminaire will be properly protected against water.
  • If the lantern flickers, does not switch to higher power modes or does not light up, it may be due to one of the following reasons:
    • The battery is almost dead - charge it or replace it.
    • The contacts inside the lantern are dirty - clean them with a cotton swab dipped in alcohol.
    • The head, body or back of the lamp is loose - tighten them.

Newsletter subscribe

Subscribe to our newsletter so you don't miss anything

* Required field