The PSP adapter is designed and constructed in a metallic design. The body of the adapter is turned from aluminum alloy for high strength and lightness. The screws, levers and pins are made of strength steel.
The thread ensures a strong and secure connection between the preloader and the PSP adapter. The adapter and the preloader are installed on the front of the day optic. Removal or installation
...
watchdog_desc
The PSP adapter is designed and constructed in a metallic design. The body of the adapter is turned from aluminum alloy for high strength and lightness. The screws, levers and pins are made of strength steel.
The thread ensures a strong and secure connection between the preloader and the PSP adapter. The adapter and the preloader are installed on the front of the day optic. Removal or installation from the day optic takes seconds. Mounting the adapter allows you to select the lever position on the left or right side.
The position of the front display in the field of view of the daytime optics can be adjusted using a special articulating mechanism. Once the position is set, it is fixed by tightening the screw and does not change any more. The design of the joint creates a stable connection to the front axle.
Reducing rings for different diameters are supplied in the set with the adapter. Before fitting the adapter to the lens of the optic, the ring corresponding to the outer diameter of the tube of the day optic is measured and inserted into the adapter. The reducing ring will define the clearance and ensure a firm and smooth contact with the daytime optic and increase the reliability of the attachment.
High temperature differences do not affect the operation or mounting of the adapter. The adapter will operate reliably in other conditions without any readjustment from room temperatures.
The adapter is rugged and designed for long life, even when used with day optics on large caliber guns.
SK
CZ
HU
Croatia
Poland
Slovenia
